TFB Review: The Slick-Sided CZ P10 M Micro Compact Pistol
The CZ P10 M pistol was released in Europe in 2019, then in the US in 2020. The US market was polarized and seems to be one of those concepts that people either love or hate. What’s so controversial about the CZ P10 M, you ask? It really comes down to the omission of one part, the manual slide release, not to be confused with a slide stop in this case, as it still has one that locks the slide to the rear after the last round is fired. Let’s take a look at the pros and cons of this concept, as well as how the CZ P10 M actually feels, conceals, and shoots.
CZ Coverage @ TFB:
CZ P10 M REVIEW- INITIAL IMPRESSIONS & SPECS
I was pretty curious to test out the CZ P10 M, primarily because of the controversy surrounding the lack of one feature, the slide release. I’ve been shooting pistols for decades, and I found it hard to believe that one little feature can make this pistol sink or swim in people’s minds. I was pretty sure I could overcome a less traditional manual of arms, more on that in a bit.
Picking the CZ P10 M up out of the case, it fit my hand comfortably and seemed to be a manageable size for shooting the 9x19mm caliber and for concealment. The P10 M feels great in the hand, and while it retains the same textured theme as its big brother, the P10 F, it’s a little more subdued and less aggressive on my hand and inside the waistband. The CZ P10 line has been a popular option on the striker-fired market, and I was glad to see that CZ didn’t go overboard when scaling the M model down when it came to the slide height over the shooting hand. When handling micro-compact and subcompact pistols, I always check that I won’t get bit by the slide as it reciprocates, and the P10 M shouldn’t have any problem with this unless the shooter has extra-large hands. I have medium-sized hands, so the clearance left enough room that I believe shooters with large hands should remain un-bitten.
CONCEALABILITY
The CZ P10 M was built for concealment and is comparable in size to a SIG P365 or a Glock 43. I found that it was a bit large for pocket carry, with the exception of my running shorts that I wrote about HERE and HERE on TFB’s Concealed Carry Corner. I took the P10 M on a few runs and it didn’t hinder my stride or weigh my shorts down. Since there wasn’t any slide release, I decided to take full advantage of the slick-sided pistol, so I made a minimalist/trigger guard holster out of Kydex. I wore the P10 M at my 4 o’clock position which is my preferred spot. I’ve carried my Glock 22/27 with a minimalist holster as well, which is usually fine, but sometimes the sights and slide stop irritate my skin, but the P10 M perfectly fit this method of carrying and was naturally well concealed without printing.
I was worried a bit about how the slide serrations would interact with my love handles, but I didn’t notice them at all. To be honest, carrying the P10 M with only a trigger guard holster lashed to my belt was so comfortable, I’d probably forget it was there if I hadn’t already been so used to carrying a firearm every day for years.
Another nice feature of the CZ P10 M is the three-dot, photoluminescent sights. One quick charge from an LED flashlight lasts several hours, so carrying with the minimalist holster, I was able to do a quick recharge of the sights with only minimal exposure of the gun. The photoluminescence CZ uses on their pistol sights ( also seen on the SP-01 Phantom I reviewed) seems to be an excellent middle ground between night sights and the standard, non-illuminated black or three-dot sight system.
TRIGGER TIME
The sights are quick to acquire and the recoil is managed easily. As with the CZ P10 F Competition Ready model I reviewed, the magazine ejects quite positively, no ripping the magazine out is required on the P10 M.
One aspect of the internal slide stop is that it can be actuated with a finger, but it’s a two-handed affair to hold the frame in one hand and pull the slide back with the other. Then, with the hand holding the slide, reach a finger into the ejection port and pull up on the slide stop on the left side of the magazine well. I could see this method coming into play more in training if an instructor was to require the slide locked open before live fire and the user’s magazines are already loaded.
The P10 M’s trigger isn’t great, but it’s not terrible either. There’s a bit of take up, then a definitive stop on the sear, but to trip the sear, there’s roughly a quarter-inch pull which feels spongy. It didn’t take long to get familiar with it, and it seems to me that it falls somewhere in the middle between horrible triggers and excellent triggers. For what the P10 M is built for, I’m not going to complain about the trigger, because in a life and death situation, there’s not much time to be a trigger snob, and I was able to make hits at 30 yards with the P10 M with ease.
The CZ P10 M chugged through everything I fed it, from the lowly steel-cased FMJ, up to brass cases, and most importantly, defensive ammo. I ran it through Hornady’s American Handgunner and Critical Defense loads, as well as Sierra’s JHP loads which I’ve never tried before. The P10 M was reliable throughout all of my testings.
FINAL THOUGHTS
The CZ P10 M pistol may go a bit against the grain compared to almost any other modern pistol regarding the lack of a manual slide release-slide stop lever, but it does so with a purpose, as I believe I showcased by using only a trigger guard holster. Wearing the P10 M against my skin was comfortable while walking, standing, sitting and driving for hours. For experienced shooters, it may take some practice to get used to manipulating the internal slide stop, but for anyone who buys this as their first pistol, I imagine they’ll pick it up easily.
Since the CZ P10 M was made for concealed carry, I made sure to have my wife work the slide. She was able to do it, but working against the double recoil springs made it tough, so anyone who has hand or arm strength issues may want to try this out before purchasing.
Check Prices on CZ P-10M Pistols
CZ had a good attitude about this pistol and they realize it may not trip everyone’s trigger, but it’s available for anyone if they want the thinnest possible 9mm carry piece. You can view CZ’s dedicated webpage on the P10 M HERE, or view their whole lineup of products at CZ-USA.com. The P10 M has an MSRP of $505.
What do you think about the CZ P10 M? If you’ve already grabbed one, how has your experience been?
We are committed to finding, researching, and recommending the best products. We earn commissions from purchases you make using the retail links in our product reviews. Learn more about how this works.
Doug has been a firearms enthusiast since age 16 after getting to shoot with a friend. Since then he's taken many others out to the range for their first time. He is a husband, father, grandfather, police officer, outdoorsman, artist and a student of history. Doug has been a TFB reader from the start and is happy to be a contributor of content. Doug can be reached at battleshipgrey61 AT gmail.com, or battleshipgrey61 on Instagram.
More by Doug E
Comments
Join the conversation
Thank you for the photo of the internal slide stop. One of my few concerns about the pistol was if (with my luck), the pistol had a double feed, how would I clear it? A new carry pistol with one more round than I already have that is comfortable to shoot is all well and good, but if you can't get at those rounds because of a catastrophic stoppage, then the remaining rounds might as well be zero. Small handed guy, with a small pistol that has less rounds, but proven track record. But always open-minded to acquiring "better".
I really don't see how the "no external slide stop" improves anything. A slide stop isn't exactly an obtrusive or abrasive part, like, say, the cylinder latch on a revolver, and eliminating it (and a takedown lever, too) just to make the gun "slick-sided," to my mind, doesn't overcome the clumsiness you've just added into both locking the slide back without an empty mag (how easy is it to do with gloves on?), or field-stripping the gun. Plus, I'm not a fan of sticking fingers inside a pistol like this; it might give you a minor-league version of Garand thumb. I guess I'll just never fit in with the cool kids.